INDIAN
SUPPLIER
SUPPLIER
Agni Insulations
Category -
Electronics & Electrical Supplies
We offer a wide range of Fiberglass sheet (Epoxy/Polyester) in India. These Laminated sheets are made from Silane Treated Fibre Glass Cloth & different type of Resins as a bonding medium. By proper selection of cloth and specific resin, we get improved mechanical & electrical properties.
Application:
Epoxy: Heavy duty transformer, Dry transformers, Control Panels, Switch Gears etc. depending on end use.
|
Sr. |
Parameter |
|
||||
|
1 |
Specific gravity |
|
||||
|
2 |
Tensile Strength, N/mm2 |
|
||||
|
3 |
Cross Braking Strength, N/mm2 |
|
||||
|
4 |
Compressive Strength, N/mm2 |
|
||||
|
5 |
water absorption after 24 hrs, Immersion in water at 200 degree C, % |
|
||||
|
6 |
Electric Strengh, AC (proof voltage) Flate wise in oil at 900 degree C kv/mm |
|
||||
|
7 |
Martens heat Distortion Temperature, 0 degree C |
|
Technical Specification:
Availability:
Epoxy / Polyester: 0.2 to 100mm size thickness
Size : 1m x 1.2m, 1m x 1.8m, 1m x 1m, 1.2m x 1.2m
Pultrusion Items (Angles, Channels, 'I' section, Dog bones, Pipes, Rods, coil support blocks and Gratings) :
Application :
Transformers, chemical industry, electrical & Industrial uses. Also as per client's requirements.
Availability :
All sizes up to practical requirements are available. Special sizes on demand can be made.
Specification:
1(b)(i) Dogbones
|
A(mm) |
B(mm) |
C(mm) |
R1(mm) |
R2(mm) |
|
6 |
8 |
3 |
1.5 |
6 |
|
8 |
10 |
4 |
1.6 |
6.25 |
|
9 |
12 |
4, 5 |
1.5 |
4 |
|
10 |
12 |
5 |
1.7 |
6.25 |
|
10 |
13 |
5, 3 |
1.7 |
6.25 |
|
11 |
13 |
5, 5 |
1.5 |
4, 5 |
|
10 |
14 |
5 |
1.7 |
6.25 |
|
10 |
16 |
6 |
2 |
6.25 |
|
12 |
16 |
6 |
1.8 |
6.5 |
|
13 |
16 |
6, 5 |
2 |
4.75 |
|
14 |
16 |
6, 5 |
1.8 |
6.5 |
|
14 |
18 |
7 |
1.8 |
6.75 |
|
15 |
20 |
7 |
1.9 |
7 |
|
20 |
22 |
4 |
2 |
7 |
|
22 |
25 |
5 |
2.5 |
8 |
1(b)(ii) Corner Piece:
|
A(mm) |
B(mm) |
C(mm) |
D(mm) |
R(mm) |
|
14 |
14 |
8 |
8 |
8 |
|
14 |
22 |
8 |
13 |
10 |
|
17 |
9 |
6 |
6 |
10 |
|
22 |
22 |
13 |
13 |
13 |
|
25 |
25 |
15 |
15 |
15 |
1(b)(iii) Hat Section:
|
A(mm) |
B(mm) |
C(mm) |
D(mm) |
E(mm) |
F(mm) |
|
14 |
24.4 |
14.7 |
7.6 |
9.3 |
2.7 |
|
18 |
24.4 |
14.7 |
7.6 |
9.3 |
2.7 |
|
24 |
24.4 |
14.7 |
7.6 |
9.3 |
2.7 |
1(b)(iv) Pultruded Angle:
|
A(mm) |
B(mm) |
C(mm) |
|
25 |
25 |
3 |
|
25 |
32 |
3 |
|
25 |
38 |
3 |
|
38 |
38 |
3 |
|
50 |
50 |
5 |
1(b)(v) 'I' Section:
|
A(mm) |
B1(mm) |
B2(mm) |
C1(mm) |
C2(mm) |
|
25 |
5 |
3 |
15 |
10 |
|
32 |
5 |
3 |
15 |
10 |
|
40 |
10 |
6.5 |
15 |
10 |
1(b) (vi) Pultruded C – Section:
|
A(mm) |
B(mm) |
C(mm) |
|
30 |
75 |
3 |
|
50 |
100 |
5 |
|
50 |
150 |
5 |
|
50 |
200 |
5 |
1(b)(vii) Pultruded Rectangle Section:
|
A(mm) |
B(mm) |
C(mm) |
|
25 |
50 |
3 |
|
25 |
50 |
5 |
|
40 |
40 |
3 |
|
40 |
40 |
5 |
|
50 |
50 |
5 |
|
75 |
75 |
5 |
|
25 |
75 |
4 |
1(b)(viii) Pultruded Hollo Tubes:
|
A(mm) |
B(mm) |
|
10 |
16 |
|
17 |
22 |
|
22 |
27 |
|
19 |
25 |
|
25 |
32 |
|
27 |
32 |
|
32 |
38 |
