Non Asbestos Products

We offering compalete range of technology driven project maintenance solutions forNon Asbestos Products.

Ceramic braided packings :

Ceramic Braided packing are dense, high performance packing fabricated from ceramic fiber yarn braided around a core of ceramic fiber rope either to form a packing in Round or Square section .
Packing :: 6 mm ~ 100 mm as per requirement

Product Applications :

a Replacement of asbestos rope for heat treat furnace,seals for stoya and over, expansion joint packing, bulk in tadpole gaskets, gaskets and seal.

a Sealing of over, furnace or boiler doors.

Ceramic cloth :~

Ceramic cloth is made from alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity. Ceramic fiber cloth contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Product Applications :

¢ It can be used for expansion joints, safety blankets, curtains,welding blankets, protective and insulating covers, shields, gaskets, etc.,

¢ It has been widely used in Welding, Foundry Works, Aluminum And Steel mills, Boiler Insulation And Seal Shipyards, Refineries, Power Planets And Chemical Planets.

Ceramic insulating tapes :~

Ceramic Fiber Tape is a woven fabric made from our high quality ceramic fiber yarn.

The tape is reinforced with fiberglass filament. Ceramic fiber tape contain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

Product Applications :

¢ It can be used for protective and insulating covers or shields, cable or pipe wrapping, expansion joints, high temperature seals or gaskets.

¢ The product has been widely used in Welding, foundry works, aluminum and steel mills, boiler insulation and seal, exhaust systems, shipyards,refineries,power plants and chemical plants.

Glass Fiber Cloth :~

t Woven from glass fiber texturised yarn upon shuttle looms to produce requred size.

t Fiberglass cloth is used as heat insulating meterial and an excellent substitute for asbestos cloth.

t It is widely applied as insulation of soft or hard tubes, heat insulation covering of heater and cooler, fire resistant shell, other insulation protecting covering and insulation of watercraft equioment because of its brilliant characteristics of high intensity, low density and good insulation.

Glass Fiber Tape :~

a Fiberglass tape which is made of the non-alkali glass fibre yarns.
a The main component is E-glass, oxidation potassium and oxidation sodium with the content of oxidation of alkali metals is not more than 0.5%
a Fiberglass tapes can be regarded as complete binding solution as they have high tensile strength and reinforcing quality.
a They are highly recommended for electrical mending.

Thickness : 3mm 6.0mm              

Width : 25mm 100mm

Product Applications :

¢ Excellent electrical insulation properties
¢ Excellent dimensional stability
¢ Excellent heat resistance (Normal service temperature is 120C).

Glass Fiber Rope :~

a The rope is twisted from a number of texturized glass fiber yarns
a The diameter of the rope is determined by the number and thickness of the yarn being used.
a Fiberglass Rope is extremely strong, resilient and flexible
a The special knit-braided process enables Fiberglass Rope to spring back to its original shape after compression making it an excellent choice for gasketing that acts as heat break or dooe seal.

Product Applications :

¢ Gasketing for industiral ovens and furnaces, boilers and wood burning stoves.
¢ Used in stove door seals, ovens, coke furnaces, thermal insulation of electrical wire, wrapping of round pipes.

Teflon ptfe rod :~

Rods are available in both virgin grades and reprocessed (mechanical) for less demanding applications. Various fillers are available to modify the properties of PTFE to meet applications. Teflon rod has the lowest coefficient of friction of all known solid materials.
Teflon bar has the best electrical properties of all plastics rods.

Teflon ptfe sheet :~

Skived and milded sheets can be made in any thickness from 0.5mm up to 100mm.
Skived and molded sheet is ideal as a slide surface, for chute liners, other kinds of liners, diaphragms, including complex stamped gasket configurations for many pharmaceutical and food processing.

Teflon ptfe bushes :~

PTFE bushes which are extensively used in various industrial applications.
Fabricated from superior grade PTFE, these bushes have long work life during which used optimize utility.

Specifications :

t O.D: 12-250mm (standard)

t I. D: 6-200mm (standard)

t Length : 100mm (standard) up to 300mm or longer in special cases

PTFE tubes & pipes :~

PTFE tubes & pipes which are extensively used in chemical processing industry.
These tubes & pipes are appreciated for their unique features such as:

t Chemical temperature to all known chemicals

t High temperature resistance

t Insulation to electricity

t Non-flammable

100% Ptfe Packing :~

¢ The Packing ismade of pare PTFE fiber, stretched and reinforced, then impregnated with PTFE dispersion
¢ It is recommended as dynamic sealing on places where linear velocity is up to 4m/s
¢ PTFE is a substance with low heat conductivity and great thermal expansion coefficient

Specification:

Temperature : -200 C 260 C
Pressure : 20 MPA
PH :  0 14
Temp : 300' C to 450' C

Carbonized Fiber Braided Packing :~

a The packing is made of polyacrylonitrile fiber heated ingo carbonized fiber, which is woven into packing after impregnation in PTFE dispersion containing graphite particles.
It is used as dynamic sealing inn presence of media of weak acid or alkaline or media that contain few grains of solid particles.

Temperature : -210 C 260 C
Pressure : 25 MPA
PH : 0 14

100% Gfo Packing :~

a The packing is braided from 100% GFO Fibre
a It has better heat conduction at high soeed as compared any other PTFE braided packings.

Specification:

Temperature : -260 C 300 C
Pressure : 30 MPA
PH :  0 – 14

Asbestos Ptfe Packing :~

¢ The packing is made of black asbestos fiber cord impregnated with PTFE dispersion. (Addition of lubricant is optionsal)
¢ It is soft in texture and suitable as the sealing of pumps for liquidated chemicals. However, packing impregnated with lubricants.
¢ It is recommended for use with reciprocating pumps or for the sealing in places whrere linear velocity is up to 10m/s.

Temperature : -240 C 260 C
Pressure : 20 MPA
PH : 2 – 12

COMPRESSED ASBESTOS FIBRE (CAF) JOINTING SHEET :~

Available Sheets
1590 mm X 2000 mm +- 5% & 3180 mm X 2000 mm +- 5%

Thickness
0.25 mm, 0.4 mm, 0.75 mm, 1.5 mm, 3.0 mm, 5.0 mm (Other thickness on request, subject to minimum manufacturing quality)