Products We Sell Details

HYDRAULIC PRESS BRAKE

Product Description

’ANASUYA’ presents to you a range of most technically advanced hydraulic press brakes with all latest features as per international standards.

Features:

· Low initial cost

· Low tooling cost

· Easy & Quick setting

· Enormous versatility

· Accurate repetition & bending

· User friendly

· Easy maintenance

· Standard spares, hence easy availability

MACHINE CONFIGURATION:

SR. NO.	TONNAGE	TABLE LENGTH (MM)	BENDING CAPACITY (APPROX.)		TABLE WIDTH (MM)	CLEAR PASS (MM)	RAM STROKE (MM)	OPEN HEIGHT (MM)	THROAT DEPTH	APPROACH PRESSING RETURN (MM/SEC)	POWER (H.P.)	PACKING DIMENSION (LXWXH)	WEIGHT
1	30	1050	2X1050	4X600	125	600	100	250	150	30-7-30	3	1200 X1150X900	1500
2	30	2000	2X2000	3X1250	125	1550	100	250	200	30-7-30	3	2200X1150X1 900	2400
3	40	2500	2X2500	3X1500	180	2050	100	250	200	40-8-40	5	2700X1150X1 900	3000
4	50	2000	3X2000	4X1500	180	1550	100	250	200	35-7-35	5	2200X1150X1 900	3200
5	50	2500	2.5X2500	3X2000	180	2050	100	250	200	35-7-35	5	2700X1150X1 900	3500
6	65	2500	3X2500	2.5X2500	180	2050	150	330	200	32-5-32	5	2700X1200X2 000	3700
7	80	2500	4X2500	5X2000	180	2050	150	330	200	40-6-46	8	2700X1550X2 300	4500
8	80	3000	3X3000	4X2500	180	2550	150	330	200	40-6-46	8	3350X1550X2 300	5000
9	100	2500	5X2500	6X2000	180	2050	150	330	200	43-6-48	10	2700X1550X2 300	5400
10	100	3000	4X3000	5X2500	180	2550	150	330	200	43-6-48	10	3350X1550X2 300	6400
11	100	4000	3X4000	4X3000	180	3100	150	330	200	43-6-48	10	4250X1650X2 300	8200
12	125	2500	6X2500	8X2000	230	2050	150	350	300	38-6-65	15	2750X1650X2 500	6400
13	125	3000	5X3000	6X2500	230	2550	150	350	300	38-6-65	15	3350X1650X2 500	7100
14	125	4000	4X3500	5X3000	230	3100	150	350	300	38-6-65	15	4250X1650X2 500	9000
15	160	3000	6X3000	8X2500	230	2550	150	350	300	32-6-55	15	3350X1800X2 600	8500
16	160	4000	5X4000	6X3000	230	3100	150	350	300	32-6-55	15	4350X1800X2 600	10000
17	200	2500	10X2500	12X2000	230	2050	200	400	300	32-6-50	20	2850X1900X2 600	8000
18	200	3000	8X3000	10X2500	230	2550	200	400	300	32-6-50	20	3350X2050X2 750	9500
19	200	4000	6X4000	8X3000	230	3100	200	400	300	32-6-50	20	4350X2050X2 750	11500
20	300	3000	12X3000	15X2500	300	2550	200	400	300	30-6-46	25	3350X2150X2 900	13500
21	300	4000	10X3500	12X3000	300	3100	200	400	300	30-6-46	25	4350X2150X2 900	17500
22	400	4000	12X4000	16X3000	300	3100	250	500	350	25-5-40	30	4250X2200X3 000	20500
23	500	4000	15X4000	20X3000	300	3100	250	500	350	25-5-40	40	4500X2200X3 200	27000

Standard Accessories:

· Main Drive Motor

· Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation

· Movable work station with foot switch

· Pair of lifting links

· Pair of Sheet support

· Manual back gauge

· One set suitable five way Die & Punch

· Centralized lubrication system

Optional Accessories:

· N.C. Operated Stroke control

· N.C. Operated back gauge & stroke control

· Sliding sheet support with swing away stoppers

· Hardened tools & special toolings Antideflection unit

· Hydraulic tool clampingt

· Motorised back gauge with DRO

· Higher trroat depth

· Anti Deflection Unit

· Multiple depths setting arrangement

· First fill of hydraulic oil

Power Pack Unit:

The low noise Hydraulic system is designed as per international practices and assembled with internationally reputed make components.

Valves are mounted on a specially designed compact manifold block minimising pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.

Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.

Structure:

The all steel structure of ANASUYA Press Brakes consists of side frames, ram, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates. All sections are designed to give minimum deflections and maximum rigidity as per international standards. Pair of hydraulic cylinders is synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.