Delta DN 50 G65 with a lateral Totailzer

Chem-Tech Associates are one of the leading domestic supplier, wholesaler and dealer of Delta DN 50 G65 in aluminum equipped with a lateral Totailzer.  We are one of the authorized dealer of Itron.

Totaliser:

● 9-digit index for a large capacity

● IP67 Protection

● UV resistant cover

● Equipped with a built- in silicagel cartridge As an option, it can be equipped with an external one, allowing easy maintenance even in extreme conditions.

● Orientation can be adjusted without decommissioning the meter (except 2040)

● Fitted with a reflecting disc on the first drum

● Integrated optical disc to facilitate the periodic calibration of the meter

● Customized name plate (bar code, logo, customer serial number…)

● Unit: m³ or Cf³

● Lateral Totalizer available as an option.

Transmitters:

● Double Low Frequency fitted as standard on the whole range

● Anti-tampering is supplied as standard on 2050/2080/2100

● High Frequency is supplied as an option on the whole range.

Accessories

● 100 μm flat gasket-filter to fit between flanges DN50, DN80, DN100 and DN 150

● External Silica gel cartridge: accessory for maintenance on the installed external silica gel cartridge for extreme conditions.

● Flange DN50 PN10/16-ANSI1125, can be delivered to adapt a 2040 meter (thread connection) to flange connections DN50. This gives a flange-to-flange distance 171mm.

●Pete’s plug: Ideal device for filling lubricant in the cover of the meter while equipment is in service. It must be fitted instead of the tap plug of the cover.

Plugged on the pressure tapping. It can be used to measure the pressure and the temperature of the measured gas.

Connection size: ¼” NPT or ¼”BSP. Maximum pressure of gas: 30 bar.

● Bracket for mounting a volume converter: this device permits the Actaris COURS PTZ volume converter to be adapted directly onto the meter, or at the most convenient place to the meter to enable the converter index to be easily read.

● Thermowells: these thermowells threaded ¼” NPT, can be plugged on to the meter. They are retrofit able on the standard

They are retrofitable on the standard version (plugged on to the existing pressure tapping), or they can be installed on the versions equipped with extra- tapping.

The internal diameter o the termowell is 7mm; it allows the mounting of the most standard temperature probes.