Pressure Feed Spray Gun

We are manufacturer and domestic supplier for wide range of pressure feed spray gun. It provides excellent performance with all refinish primer and paint systems, plus assured compliance with EPA legislation. We are offering these at industry leading price.

Technical Specification:

Operation

Mix, Prepare and filter the coating material to be sprayed to the manufacturer's instruction. Adjust the spray gun controls, air and coating material pressures before filling the cup or turning on the materials supply. 

v  NEEDLE ADJUSTMENT:

Fully open needle adjusting screw (20) by turning counter-clockwise until the first thread shows.

v  FAN PATTERN ADJUSTMENT:

Turn adjusting screw (21) to fully open position, by turning counter-clockwise

v  AIR CONTROL VALVE:

Open air adjusting screw (B-14) fully by turning counter-clocks wise (DEJGA models only).

v  AIR SUPPLY PRESSURE:

Regulate to 3.0 bar (43-45lbf/in2).

v  PRESSURE FEED COATING MATERIAL SUPPLY:

Regulate pressure to 0.5 bar (7lbf/in2).

v  TURN ON:

Coating material and air supplies

v  TEST SPRAY:

If the finish is too dry or application too slow, reduce air pressure or increase coating material supply pressure. If the finish is to wet, reduce the coating material supply pressure, or turn the needle adjusting screw (20) fully clockwise then gradually open until the desired pattern is achieved. 8.If the atomization is too coase increase the air pressure, if too fine, reduce the air supply pressures or turn air control valve (B-14) gradually clockwise.