We are one of the leading suppliers of Adrocut S Water Soluble Cutting Fluid .
Use: Adrocut CUTTING OIL is a high quality, water soluble cutting oil emulsion, produced by base oils of an exceptional quality level, and enriched additives which protect machine beds and components from rusting. It is built with bactericide and hence has long sump life. . Its outstanding formulation provides excellent lubrication properties and effective cooling. Recommended ratio3% - 10%.
The Concentration depends on the application and use
Applications: Adrocut CUTTING OIL recommended for use on both ferrous and non-ferrous metals in a wide variety of operations including grinding, milling, turning and drilling. Tis an ideal product when the requirement of lubrication cooling and rust protection is needed.
Advantages:
ü Efficient lubrication properties
ü Effective cooling properties
ü Outstanding protection from rust and corrosion
ü Increased tool life
ü Non-staining
ü Effectiveness in a wide variety of machining operations
Fluid Type: Milky
Suggested Concentrations
Center less, 10, 00, Surface Grinding 25:1 (401o)
Milling, Drilling, Turning 20:1 (50f0)
Tapping, Reaming, Sawing 10:1 (100f0)
Typical data
Concentrate
Appearance -------- Amber, fluid
Specific Gravity -------- 0.99
Emulsion
Appearance ----- Milky
pH at 5% -------- 9.8
IP 287 Corrosion test% BP --------- 5.0
HSE
A full health and safety data sheet is available on Request. Additional information including advice on suitable disposal methods is also available.
Storage and Handling
The product should be stored under cover and protected from extreme temperatures (above lOOC and below 300C is ideal). Avoid water collecting in the rim of upturned barrels. Shelf life of the product 6 months from the date of supply.
Product Mixing
ADROIT advice the use of automated mixing systems. Mixing manually, always add the concentrate to the water with maximum agitation, if water is added to the concentrate, the emulsions may prove unstable. Avoid mixing with very cold concentrate or water. Check emulsion strength using a calibrated refractometer. Details of where to purchase equipment and how to use it are available.
Product Management
The working concentration should be carefully controlled and monitored on a daily basis as higher and lower working concentrations. Machines should be cleaned out regularly. Fluid and particulate contaminants should be kept to a minimum. This is important especially in terms of bacterial control and is in line with the latest advice from government and professional sources. Detailed reference sources are quoted in the MSDS.
