INDIAN
SUPPLIER
SUPPLIER
Goyani Machines Pvt. Ltd.
Category - Machinery
INJECTION:
• High Precision Barrel and Screw with large L / D Ratio
• Twin Cylinder Injection Unit with Radial Piston Hydraulic Motor
• Decompression after extruder runs (Suck Back)
• Two Stage Injection Pressure
• Injection Speed and Screw Back Pressure is fully adjustable
• Ceramic Band Heater with PID Temperature Controller
• Slide shut off on Hopper
CLAMPING UNIT:
• Five-Point Vertically Mounted Twin Toggle Mould
• High Speed Mould Clamping with Slow - Fast - Slow System
• Moving Platen Skates for good Platen support
• Hard - Chrome Plated Tie Bars
• All Platens are from S.G. Iron Casting
AVAILABLE OPTIONS:
• Auto Mould Heights Adjustment for quick Mould Change
• Auto Lubrication System
• Auto reciprocating System
• Hydraulic Core Pulling
• Hydraulic / Pneumatic Ejector
• All Temperature Indicator
• Hopper Block Temperature Indicator
GENERAL:
• Resettable Shot Counter
• Oil Level Indicator
• Safety Gate with Hydraulic and Electrical Inter Lock
• Stainless Steel Hopper
• Machine frame fabricated from Sq. Tube
• Dust Proof Oil Tank
• Pump and Motor mounted on Shock Absorbing Pad
| Injection Moulding Machine - TECHNICAL SPECIFICATIONS | ||||||||||
| MODEL | UNIT | GM - 25 | GM - 55 | GM - 80 | GM - 120 | GM - 160 | GM - 200 | GM - 250 | GM - 350 | GM - 400 |
| INJECTION UNIT | ||||||||||
| Screw Diameter | mm | 25 | 30 | 35 | 42 | 48 | 52 | 60 | 70 | 80 |
| Plasticising Capacity | Kg/Hr | 15 | 35 | 40 | 65 | 80 | 125 | 180 | 285 | 325 |
| Shot Volume | cm3 | 50 | 85 | 145 | 220 | 325 | 425 | 745 | 1230 | 1750 |
| Shot Wight (PS) | Gram | 40 | 70 | 115 | 175 | 260 | 340 | 595 | 985 | 1400 |
| Injection Pressure | Kg/cm2 | 1150 | 1175 | 1250 | 1250 | 1400 | 1385 | 1350 | 1400 | 1350 |
| Injection Stroke | mm | 110 | 125 | 150 | 160 | 180 | 200 | 265 | 320 | 350 |
| Injection Rate | cm3/sec. | 40 | 65 | 75 | 110 | 115 | 140 | 240 | 325 | 425 |
| Screw Revolution (Max) | Rpm | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 175 | 175 |
| Nozzle Stroke | mm | 125 | 175 | 250 | 250 | 300 | 300 | 300 | 525 | 525 |
| Nozzle Holding Force | Ton | 2 | 3 | 3.5 | 3.5 | 4.5 | 4.5 | 4.5 | 5 | 5 |
| Heating Zones | Nos. | 4 | 4 | 4 | 4 | 5 | 5 | 5 | 5 | 5 |
| Screw L/D Ratio | - | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 | 0.05555556 |
| CLAMPING UNIT | ||||||||||
| Mould Clamping force | Ton | 25 | 55 | 80 | 120 | 160 | 200 | 250 | 350 | 400 |
| Mould Opening Stroke | mm | 140 | 190 | 280 | 360 | 425 | 480 | 550 | 600 | 650 |
| Min. Mould Height | mm | 100 | 125 | 150 | 200 | 210 | 250 | 250 | 300 | 300 |
| Max. Mould Height | mm | 200 | 250 | 360 | 400 | 480 | 500 | 550 | 600 | 700 |
| Max. Day Light | mm | 340 | 440 | 640 | 760 | 905 | 980 | 1100 | 1200 | 1350 |
| Distance Between Tie bar | mm | 200x200 | 260x260 | 340x340 | 415x415 | 445x445 | 490x490 | 560x560 | 660x660 | 750x750 |
| Mould Platen Size h x w | mm | 340x340 | 405x405 | 500x500 | 600x600 | 675x675 | 730x730 | 860x860 | 960x960 | 1050x1050 |
| Ejector Stroke | mm | 50 | 50 | 65 | 75 | 100 | 100 | 100 | 125 | 150 |
| Ejector Force (hyd.) | Ton | 1.5 | 2 | 2.5 | 3.5 | 4 | 4 | 5 | 6 | 6 |
| ELECTRIC DEVICES | ||||||||||
| Pump Motor | kw/hp | 3.75/5 | 5.63/7.5 | 7.5/10 | 11.25/15 | 15/20 | 18.75/25 | 22.5/30 | 37.5/50 | 45/60 |
| Heater | kw/hp | 2.63/3.5 | 3.3/4.5 | 5.25/7 | 6.75/9 | 9.75/13 | 9.75/13 | 12.75/17 | 18.75/25 | 22.5/30 |
| Total Electrical Power | kw/hp | 6.38/8.5 | 39703 | 12.75/17 | 18/24 | 24.75/33 | 28.5/38 | 35.25/47 | 56.25/75 | 67.5/90 |
| GENERAL | ||||||||||
| Machine Weight (Approx.) | Ton | 2 | 2.75 | 3.5 | 4 | 4.5 | 5.25 | 10 | 14 | 175 |
| Machine Size (LxWxH) | Mtr. | 3.3x0.7x1.2 | 3.8x0.9x1.4 | 4.2x1.0x1.6 | 4.8x1.2x1.7 | 5.5x1.4x1.7 | 6.0x1.5x2.0 | 7.1x1.5x2.2 | 7.3x1.6x2.5 | 8.5x1.9x2.7 |
| Oil Tank Capacity | Ltr. | 100 | 150 | 200 | 250 | 300 | 380 | 550 | 600 | 600 |
| Hopper Capacity | Ltr. | 15 | 20 | 35 | 45 | 50 | 60 | 80 | 100 | 120 |
