Ultraclean Surface Treatments

With the help of highly skilled professional experts we are manufacturing Ultraclean Surface Treatments. Concrete remover, cleaning and etching agent

Uses

For the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also for removal of hardened  concrete from tools, machinery and equipment, or rust and mill scale from steelwork.

Suitable for etching of concrete floors and surfaces prior to application surface coatings.

Advantages

Rapid Action

Safe with metals (except zinc and galvanized steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

Properties

Specific Gravity : Typically 1.08 at 25⁰C

Description

Ultraclean is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution.

Application

Cleaning small tools

Use ultraclean as a dip. The tools should be soaked overnight, then taken out and washed with clean water to remove all loosely materials. Care should be taken to avoid prolonged contact between Ultraclean and zinc or aluminium  parts of tools, e.g., rivets, etc.

Technical support

Incare provides a technical advisory service to specifies, end-users and Contractors as well as on – site technical assistance in location all over the country.

Removal of rust and mill scale

Prewet the floors, then using a stiff bristle broom, brush the affected areas with a solution of Ultraclean and water. Strength of the solution required will vary but should be between 1:1 and 1:4 (ultraclean to water). When the action has finished, wash down thoroughly with clean water. Wire brush again to remove remaining loose material and finish by thoroughly washing down with clean water. Repeat if necessary. High degree of rust or scale can be removed by soaking in the Ultraclean solution for 60 minutes.

Packaging

Ultraclean is supplied in 1,5,20 Litre Containers.

Shelf Life

12 Months of shelf life in original packaging under shaded conditions