INDIAN
SUPPLIER
SUPPLIER
Jai Maa Enterprise
Category - Construction & Real Estate
Liquid or powder products which modify and improve the properties of fresh and hardened concrete or mortar.
Water Reducing Admixtures (Plasticisers)
|
Product |
Description |
Typical uses |
Dosage |
|
Conplast® P2 11 1, 5, 20 & 200 ltrs. |
Water reducing admixture. Conforms to IS : 9103-99. Also complies with IS : 2645-2003 & ASTM C494 Type A. |
All structural and general concrete where improved density and quality are required. Cement saving where excess cement proves necessary to obtain target strength. |
150-250 ml/ bag of cement |
|
Conplast® P505 5, 20 & 200 ltrs. |
High performance, slump retaining and water reducing admixture. Complies with BS 5075 Part 1 and ASTM C494 as Type A & D & IS :9103-99 |
Significant saving can be made without reduction in strength and workability. Used for all structural concrete where improved density and quality are required. Can be used as a retarding, water reducing admixture at higher dosages. |
100-500 ml/ bag of cement |
High Range Water reducing admixtures (Superplasticisers)
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast® SP3 37 5, 20 & 200 Ltrs |
High performance water reducing super plasticizers. Conforms to IS : 9103-1999. Also complies with IS : 2645-2003, BS 5075 part 3 and ASTM C-494 Type F. |
Production of precast elements-beams, shell forms and railway sleepers. Easy Compaction in heavily reinforced concrete bridges, foundations, columns, beams and narrow formwork units |
300-570 ml/ bag of cement |
|
Conplast® SP4 30 5, 20 & 200 Ltrs. |
High Range superplasticising admixture. Complies with IS : 9103 : 1999 and BS 5075 part 3. It also conforms to ASTM C-494 Type ‘F’ and Type ‘G’, depending on the dosages used. |
Speeds up construction, increases workability and cohesion, Aids pumping by reducing line friction and dry packing. Low porosity resulting in substantially improved water penetration resistance. |
250-1 ltr/ bag of cement |
Retarding Plasticisers
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast® RP264 5, 20 & 200 Ltrs. |
Retarding and water reducing admixture. Conforms to IS : 9103-99. Also complies with ASTM C494 Tyep D. |
Avoidance of ‘Cold Joint’ where delays in transport & placing of concrete occur-towers, chimneys, high-rise buildings, using slipform shutters, tunnels/shaft lining, offshore construction and piles. |
100-300 ml/ bag of cement |
Air entering agents
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast® PA21 (S) 20 & 200 Ltrs. |
Air entraining asmixture. Conforms tom IS : 9103-99 |
Low permeability concrete water retaining structures0dams, canal lining and reservoirs, increased weather and salt resistance marine and coastal structures. High cohesiveness with harsh aggregates for concrete basements, floor slabs and roof slabs. |
100-200 ml/bag of cement |
Accelerators, Surface, Retarders & Corrosion Inhibitors
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast® NC 5, 20 & 200 Ltrs. |
Chloride free accelerating admixture. Complies with IS : 9103-99, BS 5075 Part 1 and ASTM C494 Type C. |
Precast concrete sections, concrete placed in cold weather conditions and concrete for repairs etc. |
1-1.5 ltrs/ bag of cement. |
|
Conplast® SR 5, 20 & 200 Ltrs. |
Water based surface retarder for concrete. |
Surface for producing exposed aggregate concrete finish in face-down precast concrete manufacture. |
8-12 m²/ltr. |
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast ®CN 20 & 200 ltrs |
Calcium Nitrite based corrosion inhibiting admixture |
As a corrosion inhibiting admixture for use in concrete where calcium nitrite is required. |
7.5-22.5 litre/m² approximately 2-6% by weight of cement. |
Integral Waterproofing Compounds
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Conplast® X421IC 125ml, 0.5, 1, 5, 200 ltrs. |
Integral waterproofing liquid admixture for concrete and mortar. Conforms to IS : 2645-2003 & IS : 9103-1999 |
Increase the waterproofing properties of concrete and cement sand mortars. |
125-200ml/ bag of cement |
|
Conplast® WP90 Powder 1 & 25 kg |
Integral water proofing powder additive for concrete and mortar. Conforms to IS : 2645-2003 |
To imoprove workability and trowelling properties of sand/cement mortar mixes during application and to minimize shrinkage cracks. |
100ml/bag of cement |
|
Conplast® 112 100ml, 1, 5, 20 & 200 ltrs. |
Sprayed concrete liquid admixture |
Used in sprayed concrete, shotcrete and gunite processes where rapid setting is required |
2-3 ltrs/bag of cement |
Sprayed concrete accelerators
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Sprayset® HBL 20 & 100 ltrs |
Sprayed concrete liquid admixture |
Used is sprayed concrete, shotcrete and gunite processes where rapid setting is required |
2-3 ltrs/ bag of cement |
Hyper plasticisers
|
Product |
Description |
Typical uses |
Dosage/Coverage/Yield |
|
Structuro ® 100 200 ltrs |
High performance, third generation, polycarboxylic based hyperplasticiser. Complies with IS : 9103-1999 and BS : 5075 part 3 and ASTM C-494 type F and G depending on the dosage used |
Self compacting concrete, Ultra high strength, Excellent workability and workability retention, Aids pumping. |
250 ml-1.5 ltrs/bag of cement. |
|
Structuro ® 485 200 ltrs |
High performance cohension agent specially to ensure a good consistency and stability in self compacting concrete. |
Particularly adapted to the production of self compacting concrete, used as a pumping aid and under water concreting. |
1.0-4.0 ltr per cubic meter of concrete |
Grouts & Anchors
