Grouts & Anchors

Product

Description

Typical uses

Dosage/Coverage/Yield

Conbextra ® GP1 25 kgs

Conbextra ® GP1

25 kgs

Non shrink, free flow, cementitious grout

Non shrink, free flow, extra high strength precision grout

Machine base plate grouting-turbines, generators, pumps, presses, steel rolling beds production machinery and crane rails, construction grouting-stanchions, columns, beams, bolt prockets, keyways and anchors.

13.7 ltrs/25 kg at flowable consistency

13.3 ltrs/25 kg at flowable consistency

12.5 ltrs/25 kg at parable consistency

Conbextra ® AT 25 kgs

Non shrink, free flow, extra high strength precision grout

For heavy duty support beneath load bearing units especially where high static and dynamic forces occur

12.5 ltrs/25 kg at flowable consistency

Conbextra ® HES 15 kgs.

Free Flow, high strength non-shrink, free flow cementitious grout

Special grouting applications where early strength development in the main criteria.

9 ltrs/15 kg at pourable consistency.

Conbextra ® HR  25 kgs.

Heat resistance, high strength, non-shrink, free flow cementitious grout

For grouting of equipment like blast furnace, chimneys etc. where high temperature and thermal gradients are envisaged.

12 ltrs/25 kg at flowable consistency

Conbextra ® HF 25 kgs.

Shrinkage compensated cementitious precision grout

Used for free flow precision grouting in a wide range of applications. These critical uses include heavy duty support beneath machine base plates, bridge bearings and crane rails.

13.25 ltrs at flowable consistency

Conbextra ® BPG 25 kgs.

High strength, pourable, non shrink cementitious bolt pocket grout

For grouting bolt pockets of equipments where it is essential to whithstand static & dynamic loads.

11.9 ltrs/25 kgs

Cebex® 100

225g

Plasticised expending grout admixture

Grouting of voids-tunnels and shaft linings, non-reinforced duct grouting, underpining below foundations and confined cavity fills.

225 g/ bag of cement.

Cebex® 200

225g

Hydrogen free plasticizing expansion grout admixture

Admixtre for cement grouts where a reduced water cement ratio and positive expansions are required. Applications include bed grouting, non-shrink infilling and jointing.

225 g/ bag of cement.

Conbextra ® EP10

1.0 ltrs

Epoxy resin injection grout

For injecting into cracks, Honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps (<10mm)

1.0 ltrs

Conbextra ® EP 75

Conbextra ® EP  300

Range of epoxy resin based grouts.

For use in cavities where heavy dynamic or mobile loads are encountered. Also for use in conditions where chemical spillages may occur

Conbextra EP 75-14 ltrs

Conbextra EP300-14 ltrs.

Conbextra ® EUW

1.5 ltrs.

Water insensitive epoxy material

For use in grouting gaps ranging from 0.25mm to 10mm as an epoxy injection material As an underwater epoxy grout/epoxy repair mortar in conjuction with quartz filler.

1.5 ltrs pack

Lokfix ® Range

Range of polyester resin based chemical anchors

High early strength anchoring, holding down bolts for machinery and equipment, starter bars in concrete, anti-floatation and rock bed anchors, fenders and marine equipment fixing, crane rail and railway track attached to concrete

Lokfix S-2.5 & 0.5 ltrs

Lokfix P-2.5 & 0.5 ltrs.