Industrial Flooring

Product

Description

Typical uses

Coverage/Yield

Nitoprime ® 25/25 (M) 1 & 4 litres

Epoxy resin based primer for concrete surfaces

For priming concrete surfaces prior to the application of Nitoflor toppings.

Nitroprime 25-5.5-6.5 m²/litre

Nitroprime 25(M)-6.0-8.0 m²/litre

Nitroprme ® XG

1 kg

Moisture insensitive epoxy resin based primer for concrete surfaces

For priming concrete surfaces prior to the application of Nitoflor toppings.

6.2-7.2 m²/litre

Product

Description

Typical uses

Coverage/Yield

Nitoflor ® Hardtop/Hardtop Standard 25 kg

Non metallic monolithic surface hardening compound

Ideally suited for all industrieal areas subject to the heaviest traffic e.g., loading bays, trucking lanes, car parks, workshops, machine shops, ramps, platforms etc

Application rate kg/m²

Heavy Duty         7.0

Medium Duty      5.0

Ligth Duty            3.0

Nitoflor ® LH

20 & 200 litres

High performance lithium based hardener, strengthener and densifier for concrete floors

For surface hardening of new and old concrete to prevent dust generation and to reduce wear, particularly on exposed concrete. Typical areas of application include warehouses, factories, platforms on both new and existing concrete surfaces where expoxies are not desirable

10-12m²/litre

Product

Description

Typical uses

Coverage/Yield

Nitoflor® FC140/145

4.5 litres

Eopxy resin based low/medium build chemical. Abrasion resistant floor coating.

It can be used in production assembly areas, dairies, soft drinks production and bottling plants, breweries. Kitchens, showrooms, aircraft hangers, dust proof rooms etc.

Nitroflor® FC140 45m²/pack/coat @

45 microns DFT

Nitoflor® FC 145 18m²/pack/coat @

150 microns DFT

Nitoflor® FC 150

4.5 litre

High Build epoxy resin floor coating

Provides a high build, hardwearing, chemical and abrasion resistant floor finish. It can be used as slip resistant coating in wet areas.

Base coat : 18m²/pack

@ 250 microns DFT

Topcoat : 8m²/pack

Medium size Nitoflor Antislip grains

Nitoflor® SL range

SL 500 – litres

SL 1000 – 6 litres

SL 2000 – 15 litres

SL 4000 0 16 litres

0.5-4 mm thick self smoothing seamless epoxy floor toppings

Ideal for industrial floors where a hardwearing, hygienic, dust free environment is important. Useful for hospital clean rooms, electronic assembly plants, etc.

SL 500-7.5m²/pack @ 0.8mm thickness

SL 1000-6 m²/pack

@ 1 mm thickness

SL 2000 - 7.5m²/pack

@ 2 mm thickness

SL 4000-3.75 m² /pack

@ 4 mm thickness

Nitoflor® TF 5000

12 litres

Nitoflor® TS 5000 10 litres

3-6 mm thick chemical and abrasion resistant epoxy resin colour screed.

3-6mm thick high abrasion, strength and impact resistant epoxy screed

To provide an extremely high strength floor topping with exceptional resistance to the surface mechanical wear and at the same time, has a safe non-slip finish for personal and vehicular traffic. Chemical handling and process areas, steelworks, dairies, breweries, tyre manufacturing units, paint workshops, battery rooms, plating factories etc.

2.4 m² /pack @ 5 mm

2.0 m² /pack @ 5 mm

Nitoflor® SL

Conductive/Nitoflor® SL

Dissipative

Top coat : 15 litres

Under coat – 2.4 litres

Epoxy resin based static conductive/dissipative seamless floor toppings.

For use in areas where a static conductive of a static dissipative floor is required as a measure to control static electricity. Useful for electronic components assembly areas, painting booths of automobile plants, explosive material manufacturing units, operation theatres, etc.

Conductive undercoat-15.0-17 m²/pack

Dissipative undercoat-16.0-19.0 m²/pack

Conductive/Dissipative Topcoat 7.5 m²/pack @ 2 mm thickness

Nitoflor ® EPW100

4.5 litre pack

Water epoxy floor coating

Ideal for industrial or commercial locations where a hard-wearing, hygienic, dust-free environment is important. Particularly useful when moisture content in concrete is more than 5%

22-24 m²@ 100microns dft/coat

Product

Description

Typical uses

Coverage/Yield

Nitoflor® SL 2050

12 litre pack

Flow applies, water miscible, damp-tolerant, 2-5 mm thick epoxy resin based floor topping

To provide a smooth, dense, matt finish, easily cleaned surface resistant to oils and liquids, suitable for floors in warehouses, garages, pharmaceutical industries and medical laboratories, food beverages industries, light industrial and food processing areas

0.5 m²/litre @ thick

Nitoflor® EU5

15 litre pack

High strength self-smoothing underlay

Provides an economical method of leveling floors prior to laying epoxy toppings or coatings or coatings uch as Notoflor FC140, Nitoflor FC150 and Nitoflor SL range

7.5 m²/20 kg bag @ 2 mm thickness

Cemtop® 250 T

20 kg bag

Self smoothing cementitious floor compound, 2 mm to 6 mm

Provides a self leveling, comentitious underlay for a wide variety of floor finishes which require smooth level substrate such as tiles, capeting vinyl sheeting, linoleum, rubber and other sheeting.

6.0 m² /20 kg bag 2 mm thickness

Cemtop® 400 SD

20 kg bag

3 mm to 12 mm thick cement based, self leveling, industrial floor surfacing system

Typical uses for reinstatement of existing floors or as a final wearing course on new concrete floor where specified floor tolerances have not been achieved. Suitable for warehouses, light to medium engineering operations and car parks

3 m² @ 3 mm thickness

Nitoflor WEC3000

17 kg bag

Light and medium duty abrasion resistant expxy modified ce,entitious floor screed

Ideally suited for dry areas in engineering plants, oil refineries and plant workshops and also for wet areas such as dairies, food industries, breweries etc.

3 m² @ 3 mm thickness

Nitoflor® Uragard SL  15 litre packs

Heavy duty polyurethane based flow applied, 6mm thick floor topping

For application as a self leveling floor for concrete and other substrates. This system offers high resistance against impact thermal shock, abrasion and chemicals

2.5 m² per pack @ 6 mm thickness

Nitoflor® Uragard TF 12 litre pack

Heavy duty polyurethane based floor screed, 5 mm to 12 mm thick, resistant to steam, hot water and chemicals

Provides a heavy duty floor screed where high resistance against impact, thermal shock, abrasion and chemicals is required. Suitable for use in food processing areas, drink and beverage production areas, cold stores & freezer room. Particularly useful in areas where steam or hot water is required for cleaning

2.4 m² /pack 5 mm thickness

Nitoflor® Uragard CR 12 litre packs

Heavyn duty polyurethane based hybrid floor screed, 5 mm to 10 mm thick with very high chemical resistance

For use as heavy-duty floor screed in environments where high resistance is required against chemicals, impact, thermal shock and abrasion.

1.2 m²/pack @ 10 mm thickness

Nitoflor® Uragard CR400 4.5 litre packs

Highly chemical resistant, hybrid polyurethane based, resin flooring coating

Cold rooms with temperatures down to -50C, dairies, soft drinks product facilities, pharmaceutical, chemical plants, waste water treatment facilities, laboratories, cafeterias

2.5 m² /L ( 2 coat application)

Trafficguard ® UR150

18 litre packs

Hard wearing, skid resistant, flexible protection for car park decks

Polyurethane traffic deck system designed to provide an added level of protection to new and existing, trafficked areas

Parking and throughfare -0.3 ltr/ m² Ramps-0.45 ltr/ m²

Product

Description

Typical uses

Coverage/Yield

Nitoprime® Zincrich

0.5, 1 litre

Single component, zinc rich epoxy primer

Recommended as a anti-corrosion primer for exposed steel reinforcement for use with fosroc concrete repair mortars. The product actively resists corrosion within the confines of the repaire location

4-5 m² /litre/coat

Dekguard S/ Dekguard ® Std

5, 20 liters

High performance pure aliphatic acrylate based protective and decrative coating for concrete and masonry

Recommended as a protective and decorative coating for atmospherically exposed R C structures from long term protection viewpoint. It is ideally suited for sffit of bridge decks, RC expensive in infrastructures. Can be used both in repaired and new construction situations.

Dekguard Primer-2.5 m²/litre

Dekguard S Topcoat-3 m²/litre

Dekguard Std Primer -8 m²/litre

Deckguard Std Topcoat-8 m²/litre/coat

Dekguard® S300

5, 10 & 20 litre packs

High performance high build aliphatic acrylate based protective and decorative coating for concrete and asonry

An ideal protective cum decorative coating for bridges, flyovers, underpasses, commercial and industrial building

Dekguard S300 undercoat- 2.5 m² per litre

Dekguard S300 topcoat 5-6 m² per litre

Nitocote ® EP140

4.5 litre packs

Two component, chemical resistant, epoxy coating for steel and concrete surfaces.

A hygienic and chemical resistant coating for steel tanks, concrete walls, concrete and metal columns, sluices and ducts.

10 m²/litre @ 100 microns WFT

Nitocote ® EP405

4 litre packs

Nitocote®EP 410

4 litre packs

Solvent free, food grade epoxy resin coating for potable water retaining structures, Approved by CFTRI

Two component solvent free high build epoxy coating (Hygenic chemical resistant coating for concrete, metal tanks, walls, ducts etc.

Provide protection to concrete and metal structures against corrosion from aggressive agents in drinking water and food stuff. Suitable for potable water tanks, interior coating for large dia pipelines conveying potable water structures in food and beverage industries

Provide protection against corrosion and aggressive agents. Suitable for internal for internal coating of concrete and steel structural elements.

10 m²/litre/coat @ 100 microns

16 m² @ 250 microns thickness wft per pack

Nitocote® ET550

18 litre packs

Epoxy tar based high performance resin coating

Provides protection to concrete and metal structures against corrosion from aggressive environments. Suitable for tanks above ground or in totally submerged conditions such as pipelinings. Particularly useful in sewage works, effluent treatment plants, dock and harbour installations.

1.8-1.9 m²/litre @ 350 microns DFT

40 m²/4 litre pack @ 100 microns WFT

Nitocote ® ET402

 10 litre packs

Coal tar extended epoxy resin coating

Provides chemical and abrasion resistance to prevent corrosion of concrete surfaces for applications

5.0 m²/litre @ 200 microns WFT (per coat)

Nitocote ® UR512

4 litre packs

Two component, aliphatic polyurethane protective coating for steel and concrete surfaces

Provides as easily  cleaned chemical and UV resistance protective coating. Also suitable for external water proofing

10 m²/litre/coat @ 100 microns WFT

Nitocote ® UR612

4 litre packs

High build allphatic polyurethane protective systems for steel and concrete

Offers corrosion protection in addition to waterproofing property. It is an ideal protective coating for exposed RC/steel structural members, bridge piers

8 m²/litre/coat @ 125 microns WFT

Nitocote® SN522

1, 5 & 20 litres

Ready to use colourless silicone water repellent

To provide a water repellent surface with improved self cleaning properties on exteriors of buildings, brickwork, concrete, cement rendering, natural or cost stone.

4.5-9 m²/litre

Nitocote ®HR260

5 and 20 litres

Heat resistant silicone acrylic protective coating

Used in a wide range of industrial environments like oil refineries, chemical plans, power stations etc, Where temperature resistance is required upto 260C.

10 m² per litre per coat @ 40 microns DFT

Nitocote ® HT120

4 litre packs

Solvent free, novel resin coating, resistant to temperatures up to 120°C

For high temperature service conditions up to 120°C. It is particularly useful to resist boiling water under continuous or partial service conditions

5.0 m²/litre per coat @ 200 microns WFT per coat.

Nitocote ® EN901

4 litre packs

High chemical resistant protective lining

Suitable in wastewater treatment plants, desalination plants, food processing plants, pulp and paper mills, power plants and petroleum refineries

2.0 m²/litre/coat @ 500 microns DFT

Nitocote® EPW100

4 litre packs

Water dispersed epoxy coating and sealer

Suitable for applications to reservoirs, tanks, ducts, kitchens and food processing plants

20-22 m²/3.7 litres/coat @ 180 microns WFT (100 microns DFT)

Nitocote® PE135

4 litre packs

Eco friendly, protective coating based on hydrophobic polyester resin

Suitable as both protective coating & curing compound.

2.5 m² per litre @ 400 microns WFT/coat

Product

Description

Typical uses

Coverage/Yield

Polyurea WPE

Two component, fast curring pure polyurea system suitable for a wide range of waterproffing and protective coating applications

Roof waterproofing, protective coating for waste water tanks, potable water tanks, sewage pipeline coating etc. External tanking to below ground structures. Primary nd secondary containment. Bridge deck, podium slab, water proofing

-

Polyurea FLM

Two component, fast curing polyurea system suitable for industrial flooring applications.

● Industrial flooring protective coating.

● Loading and unloading bay coating

● Car parks and garages floor coating.

● Stadium staircase coating.

● Helipad flooring coating.

-