Surface Treatments

Product

Description

Typical uses

Dosage/Coverage/Yield

Concure® WB

5, 20 & 200 ltrs

Concrete curing compound

Exposed concrete structures, silpform structures, walls, canal linings, mass concrete faces.

200-270ml/m²

Concure® LP90

20 & 200 ltrs

High efficiency polumeric resin based film forming curing agent

As a spray applied membrane to retain moisture in concrete for effective curing. Suitable for all general concrete applications and of particular benefit for large area concrete application surfaces, such as airport runways, roads and bridge works

3.3-5.0 m/ltr

(0.200 to 0.285 ltrs/m²)

Product

Description

Typical uses

Dosage/Coverage/Yield

Reebol ®/Reebol ® Std

5, 20 & 200 ltrs

Chemical mould release agent

To provide quick, clean and easy stripping of moulds and formwork and ensure high quality quality fair faced and stain free concrete

Reebol20-60m/ltr*

Reebol Std-30-40m²ltr*

* depending on the mould surface

Reebol * Emulsion Xtra 5, 20 & 200 ltrs

Concentrated and emulsified chemical mould release agent

For easy stainfree release of concrete moulds and formwork of all types. Particularly where wooden formwork is used and de-moulding or stripping times exceed 24 hours.

1 ltrs of Reebol /emulsion Xtra when diluted with 6 liters of water will cover 80-100 m² depending upon the nature of the substrate.

Product

Description

Typical uses

Dosage/Coverage/Yield

Reebaklens ® 0.5, 1.5 & 20 L

Concrete remover, cleaning and atching agent

Removes hardened concrete from tools, machinery and equipment. Suitable for etching of concrete floors and surfaces prior to application of resin or other surface coating

10-15m²/ltrs

Product

Description

Typical uses

Dosage/Coverage/Yield

Renderoc ® 52

Powder 25 kg

Liquid 0.25 kg

Structure grade prepacked cement mortars

Reinstatement of spalled concrete r.c. members like beams, colums, wall etc.

13.5 liters/25 kg

Renderoc ® HB2

Powder 18 kg

Liquid 0.54 kg

Light weight structural grade prepacked cement mortars

Reinstatment of spalled concrete r.c. members like beams slab, soffits etc.

1.3 m² at 10mm thickness per 18 kg bag.

Renderoc ® FC

20 kg

Single component polymer modified cementitious micro concrete

For application to minor imperfections in concrete and masonry surface upto 0-3mm range

4m² @ 3mm thickness for 20kg bag.

Renderoc ® RG

25 kg

General purpose, non shrink cementitious micro concrete

For repair to damaged reinforced concrete elements particularly where access is restricted and where vibration of the placed material is difficult or impossible. Suitable for such as encasements, builtups etc.

13 liters/25 kg @ W/P 0.16

Renderoc ® UW

25 kg

Antiwashout, nonshrink, high strength cementitious micro concrete for underwater repairs.

For free flow or pumped material to repair deteriorated underwater or tidal zone concrete structures without significant washout of the cement paste. Applications include quay pillers, bridge columns, concrete pilling and dams

14.5 ltrs/25 kg at W/P 0.22

Renderoc ® CS

1 kg pack

Single part, non shrink, cementitious, crack sealer for plaster, masonry and concrete

For sealing cracks on plaster, masonry and concrete substrates.

30 RM for a V groove crack of 6 mm x 6mm. The actual coverage may vary depending on the substrate conditions.

Renderoc ® CF

1, 5 & 25 kg pack

Crack filler

For sealing crack on plaster, masonry and concrete substrates

30 RM /1 kg pack for a groove crack of 6 mm x 6mm

Renderoc ® CF

5 & 15 kg

Crack filler

For the temperory patching and plugging of concrete segements, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines

-

Exposeal ® UW

(Formerly Nitoseal UW) 2.4 litres

Epoxy resin based putty for underwater repairs

For filling of blow holes, sealing cracks for underwater grouting, eliminating minor irregularities on  on concrete surfaces in damp and underwater conditions

1 litre/m²@1 mm thickness

Superpatch h

25 kg

Comentitious repair system for concrete floors

For patching replacement of worn areas, filling of holes or depressions in concrete floor slabs in factories, godowns, commercial or domestic buildings.

13 litres/25 kg

Patchroc

25 kg

Fast setting concrete patching compound

Rapid reinstatement of large areas of concrete pavements, roadways, factory floors and car parks

12 litres/25 kg

Renderoc ® RSXtra

15 kg Bags

Rapid setting repair concrete

For the emergency reinstatement of damaged or deteriorated concrete. For both international and external use

7.5 litre/15 kg. bag

Product

Description

Typical uses

Dosage/Coverage/Yield

Nitomortar ® S

10 litres

High performance epoxy resin based mortar

Repair of concrete, masonry etc., damaged due to chemical attack and for repairing areas subject to high impact or tensile loads

2 m² at 5mm thickness/pack

Nitomortar ® 30

8 litres

High build epoxy based repair mortar

For lining ETP, STP and chemical tanks along with suitable proctective coating and for repairing dams (pointing) spillways, etc., where abrasion resistance is required along with high strength

2.67 m² at 3mm thickness/ pack

Nitomortar ® FC

5 litres

Polyester resin jointing and repair compound

Repair to concrete bedding units to be used on the same day or where ultra-high strength is required-building elements, concrete reses, floor joint damage, worn stairways, blowholes & erosion pockets in concrete faces, setting window/door frame & bedding precast units

Refer data sheet

Expocrete ® EC

13.5 litres

(Formerly Nitocrete EC)

High strength epoxy concrete

The product is designed for horizontal applications. It is ideally suited for fast and permanent reinstatement of defective concrete surfaces in bridges, dams foundations, slabs, joints in highways, concrete runways.

13.5 litres pack aggregate (not supplied) has to be added at site

Expocrete ® EUW

13.5 litre packs

High strength underwater epoxy concrete

For the fast and permanent reinstatement of concrete, particularly where high strength, abrasion, impact and chemical resistance are required. The product is designed for underwater applications.

Expocrete EUW 13.5 L (27.75 kg.) Packing (without coarse aggregates)

Product

Description

Typical uses

Dosage/Coverage/Yield

Nitowrap EP (GF)

Nitowrap EP (CF)

High performance high strength, composite fibre system for structural strengthening

Used for strengthening columns, beams, slabs of load bearing structures particularly where improvement to shear strength and deformation characteristics is required. It is ideal for seismic retrofitting also. Typical applications include piers, columns, beams, slabs, retaining walls, masonry bridges, towers, pipes, chimneys, tunnels and other structures etc.

Contact Fosroc

Nitowrap CFP

(25/50) 100m length/roll

High performance, high strength, corrosion resistant pultruded carbon fibre plates

For increasing carrying capacity of structural o members particularly where increase in live load/traffic loads is expected

Contact Fosroc