Unifix is a single component easy to use powder tile fixing adhesive. It is chemically based on hydraulic and organic binders which are specially developed for this purpose. It bonds strongly to old and new cementations substrates, asbestos cement sheet and even tile on tile. It is most unique adhesive for bonding of tile to most difficult substrate and where problems of cracking of tiles, falling off of tiles arise. On curing it forms waterproofing bed between the tiles and the substrate. It forms a strong adhesive and cohesive bond and performs well in cold and hot climatic conditions. It can be used for fixing of glazed, marbles, ceramic, mosaic and glass mosaic / ceramic tiles. It saves time and cost when used for fixing of new tiles on old tiles.
BENEFITS
· Single component, easy to use
· Adheres strongly to old and new substrate.
· Nonslip tilling is possible.
· Fixing work can be started from any side or corner which is not possible in conventional way of fixing.
· No extra labour is required for holding the tiles.
· No wetting of substrate is required.
· Covers entire area below the tiles, hence forms waterproofing bed.
· No cracking and falling of tiles results.
· Saves labour, time and cost of redoing.
· No external curing with water is required.
· Universal adhesive can be used on floor, vertical walls and ceiling also.
· Resists hot and cold climatic conditions.
· Non-toxic and non-flammable.
END USES:
UNIFIX is suggested for fixing of tiles on interior and exterior surfaces of building walls, bathrooms, kitchens, water tanks, swimming pools, cold storages, food, cold drinks bottling plants, daries etc.
TECHNICAL CHARACTERISTICS:
|
Nature & Appearance |
Homogenous and free flowing powder. |
|
Colour |
Grey.(available in *white & other colour shades also) |
|
Mixing ratio i.e. water / powder |
0.24 - 0.28 |
|
Specific gravity at 30°C |
01.75 + 0.05gms/c |
|
Workability time at 30°C |
40 - 50 minutes |
|
Initial setting time at 30°C |
5 - 6 hours |
|
Complete setting time at 30°C |
24 hours |
|
Tiles readjustability time at 30°C |
20 minutes. |
|
Coverage on even levelled substrate |
0.75 - 0.95 kg/m2 per mm thick layer when used by notch trowel method |
|
Temperature resistance |
Not affected by cold and frost and resist high temperature upto 80 C continuous. |
PACKING:
· 25 kg. And 50kg bags.
· UNIFIX in white and colors available at extra cost.