Self Priming Domestic Pumps
Product Description :
|
Performance Range
|
|
Head
|
Up to 48 m
|
|
Discharge
|
Up to 4400lph
|
|
Power Rating
|
Up to 0.5hp to 1 h.p.
|
|
Max. No of Stages
|
1
|
|
Operating Limits
|
|
Max. Sand Contents
|
40g/m3
|
|
Max. Start
|
20/hr
|
|
Type of fluid
|
Clean Water, free from solid
|
|
Temperature
|
40` C
|
|
Structural Characteristics
|
- IMPELLER: made from stainless steel
- BOWL: cast iron FG 200
- SLEEVE: AISI 410
- PUMP SHAFT: AISI 410
- SUCTION CASING : cast iron FG 200
- COUPLING: AISI 410
- BEARING BUSH: Nitrile rubber
- BOLTS& SCREW: stainless steel
|
FEATURES
PUMP
- High level of hydraulic efficiency due to optimized flow geometry and high surface finish.
- Impellers are made of highly abrasion resistant Stainless Steel material.
- Rotating parts are dynamically balanced
MOTOR
- Motor designed for wide voltage fluctuations.( three phase :340-415v, 50Hz)
- Motor is IP-58 protected.
- Shaft extension connecting spigot as per NEMA standard.
- Specially designed sand protection arrangement.
- High quality Teflon thrust bearing for longer life.
- Rotor surface is coated for wear resistance.
- Rotating parts are dynamically balanced.
- Designed for high starting torque characteristics.
- Class 'B' Insulation.
SPECIAL FEATURES
- Thrust Bearings: The thrust bearing is water lubricated and made of friction free Graphite. Motors are also provided with counter thrust bearing that can stand against a thrust of 30% of the normal axial load for short period.
- Bush Bearings: Rotor guiding bush bearing is water lubricated and made of friction - free Bronze / Carbon.
- Seals: Mechanical Seal with Carbon- Ceramic surface combination are used for all motors. The Mechanical seals are protected by means of suitable sand protecting ring.
- Winding: The windings are made of insulated copper wire with non-hydroscopic thermoplastic compound ensuring high dielectric strength.
