Side Channel Pumps

Crompton Greaves Self Priming Side Channel Pumps are developed for various needs of handling water. These pumps are power driven, horizontal, segmental, self priming and capable of handling gases during liquid duty. The components providing the hydraulic effect are specifically designed, following the Mechanical Assembly Technique (M.A.T.). Hydraulic efficiency is the top priority right from the design board through manufacture.

Features:

² Self-priming upto 8.0 meters at mean sea level

² Segmental, and capable of handling gases during operations

² Flexibility of selection of different motor ratings for desired performance

² Easy coupling with motor possible at site

² Suitable for water upto 100C

² Normally supplied without Electric Motor which can be offered on request

Applications:

² These pumps are self priming and can handle gases during normal liquid duty. These are used where low discharge is needed at high heads. The pumps are designed for handling water and are suitable for following applications.

² Water supply and circulation for Buildings, Industrial and Commercial Establishments

² For Ornamental Fountains

² For water supply in small villages in hilly areas, and multistoried buildings

² For boosting pressure

² For conveying fresh or condensate water for boiler feed

² Water spraying for curing purpose in building construction

² For cleaning plant and equipment in Industrial and Commercial Establishments

² For general Industrial use for pumping water

Standard Specifications:

² Pump: Bare Pump (without Motor).

² Capacity: 400 to 20,000 LPH

² Total head: 6 to 115 meters

² Speed: Approx. 1450 RPM at 50Hz supply.

² Temperature Range: 0 to 100C

² Liquid: Clear water

² Casing pressure: 12 kg / cm2

² Shaft sealing: Stuffing box

² Connections: BSP threads in counter flanges

² Direction of rotation: Clockwise when looking at the pump from driving end

Construction:

² Position of Pump Orifices: Top Suction and Delivery openings.

² Flanges: Counter flanges are provided with female pipe threads. They are supplied together with the pump, including joints, screws and nuts.

² Bearings: One grease lubricated deep groove ball bearing for which the initial filling with grease is done in the factory. One sleeve bearing, flushed by the liquid handled.

² Shaft Sealing: The shaft passage is sealed by a stuffing box.

² Casing Joints: The joint of casings is through a special oil paper gasket