Shenoy Engineering Private Limited
Product Description :
Specifications
•Jib, also known as gib or wedge or key, is used for minimizing the clearance between male and female parts of a slide unit.
•Wear out, caused by normal use of a machine, is compensated through jib adjustment.
•Jibs can be of different dimensions and shape - plain, taper or with different angles, depending upon the application.
•Generally jibs are made of stress-relieved C-45 material. For some applications, CI jibs are also used.
•The lengths of the jibs can vary from 100 mm to 1500 mm. Their height can be 10 mm to 40 mm and thickness can be from 3 mm to 20 mm. The side angle can be 50º, 55º, 60º, 90º or so.
•Generally jibs are offered after machining. If required, scrapped or ground jibs are also offered with or without turkite lining. Oil grooves are also offered optionally on the sliding surfaces.
•For HMT & BFW milling machines, normally jibs are available in stock. For other machines and requirements, dimensional drawing or details of angle, minimum & maximum thickness, length and height are required.
