INDIAN
SUPPLIER
SUPPLIER
Tanay Sales Corporation
Category - Industrial Supplies
We are one of the top Dealers, Domestic Suppliers & Exporters of Fine Bubble Disc Diffuser. We are certified dealers of Jay Engineering.
Specifications :
|
Model |
DISC-245 |
DISC-330 |
|
Material of membrane |
EPDM |
EPDM |
|
Disc base |
ABS |
ABS |
|
Dia. Of disc(mm) |
245 (10”) |
330 (12”) |
|
Air flow(nm3/h) |
1.0-7.2 |
1.0-12.0 |
|
Bubble size(mm) |
1-3 |
1-3 |
|
Floor coverage(%) |
2-25 |
2-25 |
|
Weight(kg) |
0.60 |
0.85 |
|
Operating temp (C0) |
85 |
85 |
|
End connection (m)NPT / BSP |
20 (3/4") |
20 (3/4”) |
|
Perforated area (M2)(active surface area ) |
0.032 |
0.061 |
|
Perforation Size , Slit mm / Qty |
1 / 6600 |
1.5 / 10200 |
Material Of Diffuser
|
High quality EPDM membrane The membrane must close quickly when stop air supply, The self-cleaning design prevents clogging and highly resistant to fouling, The physical characteristic is as follows: |
|
|
Membrane Color |
Black |
|
Wall Thickness |
2 mm |
|
Tensile strength ‘’ASTM D412-92’’ |
2000 PSI |
|
Tear strength ‘’ ASTM D 624-91’’ |
110 Lb/linear inch |
|
Ozone resistance ‘’ 70 Hrs AT 40 ° C’’ASTM D 1171-94’’ |
Pass |
|
UV resistance |
Pass |
|
Durometer ‘’Shore – A’’ |
60 |
|
Ultimate Elongation |
700% |
|
The disc base and retaining ring shall be molded high quality ABS ( POLYLAC) . The physical characteristic is as follows : |
|
|
Specific Gravity |
1.06 |
|
IZOD Impact Strength |
2.6 ft-lb/in |
|
Tensile Strength |
7090 PSI |
|
Tensile Elongation |
15% |
|
Maximum Temperature |
85℃ |
Technical Features :
Heavy Duty Full Membrance support
All Accessories are non corrosive
Factory assembled diffuser for ease of installation
System expansion in field without special tools.
Partial and complete replacement system. available self purging.
Fixed and Floating (Retrievable) Design. Light weight for ease of installation
Advance Designed Diffuser
Advance diffuser design EPDM, SILICON and other specially engineered Materials available
Engineered Pores-0.65/1.2/1.5 mm maximum oxygen transfer efficiency.
Backflow prevention features.
Buoyant and Non Buoyant design Diffuser
Expected Membrane Life 7 to 10 years. For municipal waste water (it depends on various effluent parameters and perating conditions)
The properties of material are tested by CIPET. (A reputed testing laboratory.) Engineered Membrane for minimum stress and maximum life
Cleaning : clogging of fine bubble diffuser can be cleaned by mechanical cleaning and chemical cleaning system available.
Application Effluent Treatment Plant
The system can be used in various types of aeration process like :
Activated sludge system.
Oxidation pond (stabilization pond).
Aerated lagoon systems.
Aerobic degester units.
Intermittent (on/off) aeration.
Special Industrial Applications
Electrical technology.
Stripping gases.
Blending liquids.
Diffuser Testing Facility
We have wel equipped in houses testing facilities diffuser products as per ASCE standard for testing tank for test parameters like SOTR, SOTE, SAE, DO, air discharge and head loss etc.
Note : As imrovements are made from time the specifications in this brochure are subject to alteration without notice.
