Thermic Fluid Heater Husk Fired - Model Tsfb

"THERMOTECH" introduce new vertical four pass THERMOPAC with Fluidised Bed Combustion (FBC) technology ensuring complete combustion of even low grade coal and husk fuel with virtually nil wastage and achieving high heat operating efficiency.
In addition to the previous model TSCV the system is designed with FBC Technology to ensure complete combustion,
Help homogeneous mixing of fuel, maintain uniform bed temperature, leaves low unburnt fuel alongwith the dust collector, I.D. and F.D. fan for balance draft to ensure minimum infiltration of unwanted air through doors & fresh air passes through air pre-heater ensure maximum fuel to heat operating efficiency for any commercial grade of solid fuel.
The capacity ranges from 2 Lacs to 30 Lacs kcal/hr.
The vertical four pass thermic fluid heater is suited for indian industries in rapidly changing and undependable energy situation. The vertical design coupled with integral furance gives you an assurance of rated output on any solid fuel like Coal, Wood, Husk, Bagasee etc.

Combustion Technology

Complete combustion of solid fuel is achieved by thorough mixing of fuel, air and a self sustainable combustion temperature ensured by adequate oxygen to every particle of fuel.

Every solid fuel has different physical and chemical properties which influences the design and performance of the furnace in Thermic Fluid Heater. Different combustion system are shown in above diagrams.

Low Grade fuels are best handled using FBC technology to give good results. Thermotech’s unique design for efficient combustion to suit different solid fuels, like coal, lignite, wood waste. Husk, Petcoke, bagasse & Biomass fuels results in to low operating cost, trouble free operation and lesser maintenance.

Fluidised Bed Combustion

Fluidised Bed Combustion Technology is best suited for same of the fuels like low grade coal, paddy husk, agro wastes, etc., with high ash content.

FBC Technology ensures :

1.       Homogeneous mixing of fuel ensuring efficient combustion due to high turbulence in bed.

2.       Automatic operation for consistent performance, hence dependency on labors during continuous operation.

3.       Efficient Combustion of low grade fuels.

Thermic Fluid Heaters – Vertical

The vertical four pass thermic fluid heater is suited for various industries across India & abroad in this rapidly changing & undependable energy situations. Thermotech’s generous design of vertical heaters coupled with integral furnace gives you an assurance of the rated output on any solid fuels like Coal, wood, Lignite, Husk, Bagasse, Pet coke, Sow dust, etc. without compromising on performance.

Thermotech can deliver sustainable solution to meet your process requirement & thus improve process consistency & reduce downtime leading to further increase in profitability.

Auto Controls & Safeties

Thermic Fluid Temperature Control

Digital temperature indicator cum controller cut of ID/FD fan at present temperature ands Restart at present differential temperature to maintain system temperature.

Stock Temperature Control

A Blind temperature controller cut of ID/FD fan & sound alarm if stack (fuel gas) temperature exceeds to present temperature.

Low/No Flow of Thermic Fluid

Differential pressure switch connected across inlet & outlet headers signals low flow alarm in case of low fluid pressure of thermic fluid in Coils.

Low Level of Thermic Fluid

The visual level indicator & float actuated level switch fitted in expansion tank signals alarm in case of level thermic fluid in the system.

Thermic fluid Pump Motor Trip.

In case of thermic fluid pump motor trip, electrical interlocks cut off ID / FD fan.

Power Failure

Diesel Engine drive keeps thermic fluid moving in the system to prevent it’s degradation & overflow.

Excess Furnace Bed Temperature

Digital temperature indicator cum controller senses furnace bed temperature & cut off ID/FD fan above set value (for FBC unit).

Efficiency At Its Peak

Eluidised Bed Combustion

FBC technology ensure complete combustion, help homogeneous mixing of fuel, maintain uniform bed temperature & leave low unburnt fuel. Guaranteeing 5 to 7 % higher efficiency than any other combustion system.

Air Pre Heater ( APH)

A uniquely designed APH recover waste heat from flue gases and passes it to combustion chamber. This increase efficiency by 3 to 4 % Also reduce flue gas temperature at I.D. fan which in turn reduce volume of air handled resulting in lower power consumption and ensure higher life of I.D. fan.

Balance Draft

System ensure minimum infiltration of unwanted air through doors and fresh air passes through APH ensure maximum fuel to heat operating efficiency for any commercial grade of different fuels.