Products We Sell Details

Electric Trolley

Product Description

Anti drop and de-railing guide

Precision- machined runners mounted on sealed ball bearings.

Available in three basic range with further adjustment of flange width.

Anti Corrosive Powder coated finish.

In built control panel ready to use.

Technical Specification

Dimensions, Weight and Performance Data
			Electric
Capacity		kg	1000	3000
Inside of wheel flanges mm 1		Range 1	58-150	90-160
		Range 2	150-210	160-220
		Range 3	210-305	220-305
A Seat of susp, plate to runner tread		Range 1 & 2 mm	89	110
A Seat of susp, plate to runner tread		Range 3 mm	129	155
B runner tread diameter mm		mm	65	90
C runner tread width mm		mm	25	30
D runner centres		mm	128	157
E underside of runner to suspension plate		mm	28	28
F underside of runners to top of control panel		mm	120	120
G beam flange to panel end mm			287	287
H underside of runner to top of motor			138	138
J track centreline and to motor	Range 1	track widths J mm	58-150 350-390	90-160 360-395
	Range 2	track widths J mm	150-210 390-420	160-220 395-425
	Range 3	track widths J mm	210-305 420-470	220-305 425-470
K depth of plate Range 1, 2 & 3 mm			21	34
L overall length			238	290
M underside of runner to flange (Push) mm			75	105
N underside of runner to gear tip (geared) mm			90	115
Minimum rados of track curve mm			1500	1500
Electric travel weight in Kg.		Range 1	22	31
		Range 2	23	33
		Range 3	26	38
Speed M/min. Motor HP/RPM			10 0.25/1500 rpm	10 0.25/1500 rpm

1. Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side)

2. Bottom of Pendent is 500 mm from ground level.

3. Pusher bar fixing holes provided in all models.

4. Buffers available as on option.

5. Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the panel.