Are you sealing a rigid or a stamped flange?   Helpful Hints: •      &nb
sp; If there are traces of old gasket left on the parts to be sealed, clean with Loctite4:1 Chisel8 Gasket Remover •      &n
bsp; All parts must be clean & dry before sealing – use Loctite· ODC-Free Cleaner and Degreaser ... 
Click for Details [ Offer Expiry Date : 10-Jan-2010 ]

Are the parts already assembled? Helpful Hints: •      Cle
an parts with Loctite" ODC-Free Cleaner and Degreaser before applying the adhesive •      &
nbsp;If the Threadlocker will be applied below 40'F, pre-treat with Loctite" 7649 (Primer N) •       I
f the parts were... 
Click for Details [ Offer Expiry Date : 10-Jan-2010 ]

Are the parts metal or plastic? Helpful Hints:\ •      &n
bsp; If the sealant (545, 565 or 567) will be applied below 40°F, pre-treat with Loctite" 7649 Primer N •        All parts must be clean & dry before sealing use Loctite ODG-Free Cleaner and Degreaser   Pipe Sealing Cord:   ... 
Click for Details [ Offer Expiry Date : 10-Jan-2010 ]