Retaining

Is the assembly badly worn?

Helpful Hints:

•  If the retainer will be applied below 40°F (5°C), pre-treat with Loctite 7649 Primer N

•    Ail parts must be clean & dry before sealing – use Loctite ODC-Free Cleaner and Degreaser

•    If the parts have been in contact with washing or cutting fluids containing nitrites, wash with hot water

Quick Metal Retaining Compound:

Used for repairing worn coaxial parts without remachining; enables re-use of worn bearing seats, keys, spines, tapers, or for retaining shims. Agriculture Canada Approved.

Recommended for medium strength retaining of bearings & bushes with slip fit. Easy disassembly.

Thyrotrophic: will not drip, migrate to unwanted areas.

General Purpose Retaining Compound:

Recommended for parts that will need subsequent dismantling, i.e. retention of bearings onto shafts and into housings. Mil-Spec (R-46082B) Type I.

Recommended for high temperature retaining of parts with a clearance or interference fit, i.e. retaining

Bushes, bearings, seals, fans, and liners.

Gives best resistance to dynamic, axial & radial loads. Recommended for retaining shafts, gears, pulleys & similar cylindrical parts. P1NSF Reg. No: 123010